How to Install a Trampoline on a Slope
When it comes to how to install a trampoline on a slope, there are some things you need to keep in mind in order for your trampoline not to be a hazard to yourself or your children.
Generally, the best way is to install it on a flat surface. But sometimes, it’s just not possible.
If your yard is sloppy but your kids need a trampoline, you will need to invest some money to build a trench on the top or bottom side of the trampoline. This will make the trampoline secure.
Read on to see how to determine how bad your slope is and figure out the best way to level the ground for your trampoline.
How to Install a Trampoline on a Slope or Uneven Ground
If the backyard is sloppy, you need to follow these steps to enable you to install the trampoline on uneven ground.
Also Read:
Can you put a dog on a trampoline to jump?
Step 1: Determine the Slope of the Backyard
The leveling method that you would use to install your trampoline will be determined by the slope of the backyard. To do this, you will need tools like wood plank, carpenter’s level, and measuring tape to determine the angle of the slope.
The slope can be determined by placing the trampoline in the backyard temporarily at the area you want to install it. Put a plank on the trampoline in parallel to the slope. Then put the carpenter’s level on the top of the plank.
Lift the downward side of the plank and observe the bubble of the level. When the bubble is balanced between the two lines, measure the distance from the trampoline top to the plank top on the downward side.
Now you will need to divide the trampoline diameter(inch) by the above-mentioned distance(inch). If that value is more than 7, then the slope is very high and you will need to change the trampoline location to where it is less than 7.
Once you have found a suitable spot for the trampoline, you can start by following the tips below.
2). How to Level Trampoline on Slope Ground
Dig Trench for Trampoline Leveling
This is the most popular and effective way to level the ground for your trampoline in a sloppy yard. You dig a trench on the upper side and place the trampoline there.
Ensure the trench depth and the measured height are the same. Use a level to help you measure the accuracy of the depth.
After inserting the trampoline legs in the trench, cross-check for uniformity in the trampoline. Adjust the trench depth if you need to.
Add Soil on Down Side to Level Trampoline
Adding soil to the downside of the level trampoline is the opposite of digging a trench. Using the soil to fill the downslope side is another way to level the slope for your trampoline.
You can also fill the downside with mulch, sand, and other materials. The ground should be packed well and all safety measures observed. This may involve some cost if you don’t already have the materials readily available.
3). Use a Trampoline Leveling Kit
There are many effective ways to set up a trampoline on a slope. If digging a trench is not what you want, then you can explore other options.
Trampoline leveling kits are levelers that actually add an extension to the trampoline legs. They comprise heavy-gauge steel and provide great durability.
The levelers allow you to up and down the level to balance among the legs.
To level up the slope with the trampoline leveling kit, you need to attach the levelers to the trampoline legs to either extend or lessen the leveler heights to get the proper equal level.
They can be locked using nuts or clamps with the trampoline frames. This prevents them from moving the frame when jumping.
Before you purchase a trampoline leveling kit, you need to consider the load that your trampoline will be carrying. So that the leveler will be able to support that.
4). Trampoline Leveling Blocks
Leveling blocks can also be used to install a trampoline on a slope. Mainly used for cars and RVs, but they can also be used to effectively level uneven ground for your trampoline.
They can be used to increase, or decrease the trampoline height. There are stackable designs that enable you to do so.
The interlocking system enables you to lock one block with another to make the whole block durable. They are affordable and durable.
Place these trampoline leveling blocks underneath the trampoline to level the trampoline in uneven locations.
Safety Measures to Consider
Using a safety net and spring cover is important to ensure safety. This will prevent falls which can result in injury. Keep the surroundings leveled and safe.
Can I Cut Trampoline Legs to Level the Trampoline?
Yes, you can cut the legs of the trampoline to level up. You can do it but it may affect your installation of the trampoline later in the future.
You can cut the trampoline legs under some conditions. First, if the trampoline is going to be placed permanently in one place, and secondly if you have suitable tools like a saw and drill to cut the legs and make the holes.
On the other hand, some trampolines come with trampoline adjustable legs. They enable you to choose to adjust the legs to install it in an uneven backyard.
Final Thoughts on How to Install a Trampoline on Uneven Ground
Uneven ground can cause you to worry about how to install a trampoline in your yard. But the above-mentioned methods are effective ways to install a trampoline on uneven ground or slope in your yard.
If digging a trench isn’t suitable for you, then the trampoline leveling kit or blocks will help you level up the trampoline ground in your yard.
